Model NO.: G-001
Material: Ductile Iron
Pressure: Low Pressure
Seal Surface: Parallel
Gate Valve Usage: Flow Control
Application: Industrial Usage, Water Industrial Usage
Trademark: TFW
Specification: CE
HS Code: 84818040
Type: Direct-acting
Connection Form:
Flange Actuator: Manual
Thread Position of Valve Rod: Inside Gate Valve
Standard: DIN
Size: Dn50-Dn2000
Transport Package: Plywood Case
Origin: Tianjin China
DIN3352
Resilient Seated Gate Valve, DIN3202 F4, Flanged Ends, Non-Rising Stem, PN10/16.
1) Product information: The gate
VALVES supplied are mainly used for adjusting water,
Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends
Type, PVC socket
4) Material:
A) Body: Ductile iron
B) Wedge: Ductile iron, core fully vulcanized with NBR or EPDM rubber
C) Wedge nut: Brass
D) Stem: Stainless steel, BS970 431S29 or DIN17440 X 20Cr13
E) Gasket: NBR
F) Bonnet: Ductile iron
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
| NO. | PART | MATERIAL |
| 1 | Body | Ductile Iron |
| 2 | Seat | EPDM |
| 3 | Shaft | Stainless steel 420 |
| 4 | Disc | Ductile Iron |
| 5 | Wedge Nut | Brass |
| 6 | Bonnet | Ductile Iron |
| 7 | O ring | EPDM |
| 8 | Thrust ring | Brass |
| 9 | sealing ring | EPDM |
| 10 | socket head screw | Carbon Steel |
| 11 | O ring | EPDM |
| 12 | Hand wheel | Ductile Iron |
| 13 | Stem Nut | Brass |
Contact us if you need more details on Gate Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Gate Valves、DIN Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Steel Valves > Gate Valve
